POST procedure on the computer
Post (Power On Self Test) is a series of regular instruction that runs shortly after the computer is turned on and there are usually only display black and just writing or text based. The POST itself aims to identify hardware and software for computer and POST program controlled by the BIOS. The existence of this POST we can identify problems or ceck condition our computer.
 |
| POST procedure on the computer |
POST process includes several things, among them the following :
1. Check the BIOS code on the computer are in good shape or not.
2. Check the computer memory and check the size on the screen then displays the monitor.
3. Check and initialize an in-flight bus and devices on a computer.
4. Provide or display it to the user interface for system configuration
5. Identify, organize and choose the device to boot on the computer
6. building environmental systems needed by the operating system.
Hopefully this article could be useful and could help.
1. Check the BIOS code on the computer are in good shape or not.
2. Check the computer memory and check the size on the screen then displays the monitor.
3. Check and initialize an in-flight bus and devices on a computer.
4. Provide or display it to the user interface for system configuration
5. Identify, organize and choose the device to boot on the computer
6. building environmental systems needed by the operating system.
Hopefully this article could be useful and could help.
Post a Comment for "POST procedure on the computer"